MASTERING YOUR BERNINA
®
1/10/02
Electronic 1008/53
BERNINA
®
Electronic 1008
MASTERING
YOUR
BERNINA
®
• Trim all four edges of the sample fabric before beginning.
• Select the Universal Stitch #4/green - adjust width to clear the elastic.
• Measure and mark the elastic for amount needed. Allow a 2” tail at both ends.
• Draw a line on the wrong side of the fabric where the elastic is to go (this couldbe the line on a
pattern where a casing is suggested).
• Place the elastic over the line and under the foot and needle - sew a few straight stitches backward
and forward to secure the elastic.
• Stretch the elastic gently to give the fullness desired.
• When you reach the other end, secure in the same manner as the beginning.
• Even out the gathers.
Fabric: Medium weight cotton, 9” x 4”
12” of
1
/8” or ¼” cotton elastic
Needle: 80/12 Universal
Thread: All-purpose sewing
Presser Foot: Reverse Pattern Foot #1
NARROW CASING ELASTIC
To Next Page
Loading...
