MASTERING YOUR BERNINA
®
1/10/02
Electronic 1008/59
BERNINA
®
Electronic 1008
MASTERING
YOUR
BERNINA
®
LARGE TUCKS/PLEATS
Zipper foot #14 has a movable guide with 9 markings which ensure precise sewing of
a variety of different size tucks.
• Select stitch #1/green - SL 2-5mm.
• Determine fold line of tuck. Fold on this line and press.
• Adjust the guide on the foot for the widest tuck possible.
• Place fabric under foot, positioning fold of tuck under the lip of the guide.
• Adjust Needle Position to correspond with notch on guide.
• Stitch tuck, allowing folded edge of fabric to feed into lip of guide.
• The optional Seam/Quilting Guide when attached to a one-piece foot, can create a pleat up to 2¼”
wide. Note: A left guide is available; also available is a set of guides with a ruler attached; they can
be used to create pleats up to 4” wide.
• Determine fold line of tuck. Fold on this line and press.
• Attach the guide to the foot and adjust for the widest tuck possible.
• Place fabric under foot, positioning the guide along the fold of the tuck.
• Adjust Needle Position to correspond with notch on guide.
• Stitch tuck, allowing the guide to ride on the folded edge of the fabric.
Fabric: Medium weight cotton, 10” x 4”
Needle: 80/12 Embroidery
Thread: 30 wt. Cotton Embroidery
Presser Foot: Zipper Foot with Guide #14 (optional accessory)
To Next Page
Loading...
