12
BUTTON DESCRIPTION
B (1-4 Hour Daily
Timer)
This function is the same as the 1-4 Hour Timer (button A)
except with the added feature of automatically turning your
fountain on at the same time the next day for the interval
you selected.
One hour operation: press the B button once for your fountain to
turn on and it will automatically shut-off after one hour of operation
and repeat daily at the same time.
Two hour operation: press the B button twice and your fountain
will automatically shut-off after two hours of operation and repeat
daily at the same time.
Three hour operation: press the B button three times and your
fountain will automatically shut-off after three hours of operation
and repeat daily at the same time.
Four hour operation: press the B button four times and your
fountain will automatically shut-off after four hours of operation and
repeat daily at the same time.
How To Use This Function:
1. Select the amount of time you would like the fountain to run
by pressing the B button one, two, three or four times.
2. Your fountain will then run for the selected amount of time
and at the end of the selected duration it will automatically
turn o. Then your fountain will automatically turn on at the
same time the next day for the run time duration you select-
ed.
3. If you turn the LED lights on while using the 1-4 Hour Daily
Timer function, the lights will automatically turn on with your
fountain and turn o at the end of the selected interval.
Example: If you turn on your fountain, choose a two hour run
time by pressing the B button twice at 5pm, your fountain will
turn o at 7pm and turn on again the next day at 5pm and run
for two hours automatically.
C (Manual On/O)
Turns the fountain on and o without any timer. Can be used
when extended run times are desired.
Note: fountain will run until the battery loses its charge.
D (LED Lights)
Turns LED light feature on and o manually.
LED Light features will automatically turn on or o whenev-
er your fountain automatically or manually turns on or shuts
o (including any timer setting).
Status Light
Status light will blink for the number hours you have selected
when using the timer functions (buttons A and B).
To Next Page
Loading...
