26
Water Pump Connection
If your Bernini Fountain did not come with the water pump already connected to
the tube inside of the fountain bowl or if the water pump gets disconnected from
the fountain bowl, use these instructions to reconnect your water pump.
Before beginning, remove
any nials that may be
installed in the fountain
bowl.
Step 1: Unlock the fountain
bowl by turning it a quarter
turn counter clockwise.
Step 2: Rest the fountain
bowl on its side in the large
bowl.
Step 3: Connect the male
outlet on the top of the water
pump to the tube inside of
the fountain bowl. Make sure
this connection is snug.
Then reassemble the foun-
tain bowl with the instruc-
tions on page 6.
To Next Page
Loading...
