25
Using Leveling Shims
If you are having trouble getting water to ow evenly o of the spouts on your
Bernini Fountain, you may need to level the surface that your fountain was
placed on. With the included leveling shims, you do not need to move your foun-
tain, just follow the instructions below to get even water ow.
Weighing Down Your Fountain
Do you happen to live in an area with strong
winds? You can secure your fountain from
possibly falling by using the weighted cham-
ber inside the base.
Simply add several scoops of sand to the cham-
ber in the bottom of the base. Even with sand
added to the base, the battery can safely sit atop
the platform in the middle of the base’s chamber.
Place the shim underneath
the base on the opposite
side that is not owing as
strongly as the other sides.
Grasp the shim and break it
on the crease closest to the
end of the base.
Once the shim is broken, it
will be hidden but will level
your fountain.
To Next Page
Loading...
