2
Note: You will notice on the bottom of the large bowl there are two tabs coming from the
sides of the ring in the middle of the underside of the large bowl. One of the tabs on the
bottom of the bowl is larger than the other.
These tabs t into corresponding grooves in the top of the base.
Step1: Make sure to
place the base of your
fountain on a at, rm
surface.
Step 3: Turn the large
bowl a quarter turn clock-
wise to lock it into place.
Step 2: Apply downward
pressure to the bottom of
the base by stepping on the
edge of the bottom of the
base to prevent the base
from turning.
Connect the large bowl to
the base.
Bottom of large bowl Top of base
Bowl Locking System
A look at how the bowl locking system works on your Fountain.
To Next Page
Loading...
