Berthold Duo Series - User Manual

198 pages

Save Page as PDF

To Next Page

Detectors

LB 4700

Operating Manual

56926BA2

Rev. No.: 02, 04/2019

Embedded Software as of vers. 12.00.00

Main Page

Questions and Answers

J
Jessica CarrollSep 12, 2025
What to do if the voltage of the control channel deviates from the admissible set value in Berthold Measuring Instruments?
- L
  Lisa WilliamsSep 12, 2025
  If the voltage of the control channel deviates from the admissible set value in your Berthold Measuring Instruments, restart the device. If the event occurs frequently, contact BERTHOLD.
M
Matthew GordonSep 9, 2025
What to do if the voltage of the measuring channel deviates from the admissible set value in Berthold Measuring Instruments?
- K
  Kathy EvansSep 9, 2025
  If the voltage of the measuring channel deviates from the admissible set value in your Berthold Measuring Instruments, restart the device. If the event occurs frequently, contact BERTHOLD.
K
Karen HoffmanSep 8, 2025
How to fix an error in the real-time clock of Berthold Duo Measuring Instruments?
- M
  Mr. Richard RobbinsSep 8, 2025
  If there is an error in the real-time clock of your Berthold Measuring Instruments, reset the date and time, and restart the device. The event must be confirmed manually.
T
Tina RussellSep 7, 2025
What to do if the internal detector temperature is close to the limit of Berthold Duo?
- A
  Angela RiveraSep 7, 2025
  If the internal detector temperature of your Berthold Measuring Instruments is too hot: Install/check water cooling system. If the detector is too cold: Install/check heating.
A
Amanda SanchezAug 23, 2025
What to do if there is a hardware error with Berthold Duo Measuring Instruments?
- B
  Brooke AdkinsAug 23, 2025
  If a hardware error occurs with your Berthold Measuring Instruments, it indicates a defect. Contact BERTHOLD for assistance. The hardware may need to be checked and replaced.
J
jesusewingSep 5, 2025
What happens if proper function of Berthold Duo can no longer be guaranteed?
- D
  Daniel WilliamsSep 5, 2025
  If the proper function of the Berthold Measuring Instruments can no longer be guaranteed, it is recommended to have the device checked by Berthold Technologies, even if it still seems to work properly.
M
Mr. Jeffrey VasquezSep 4, 2025
What to do if the current high voltage deviates from the average high voltage by more than 20% in Berthold Duo Measuring Instruments?
- L
  Latoya RodriguezSep 4, 2025
  If the current high voltage deviates from the average high voltage by more than 20% in your Berthold Measuring Instruments, check the detector electronics and photomultiplier. If necessary, contact BERTHOLD.
B
Brett WhiteSep 3, 2025
What causes the watchdog to trigger a restart of Berthold Measuring Instruments?
- S
  Stephen BerrySep 3, 2025
  If the watchdog has triggered a restart of the Berthold Measuring Instruments, and the event occurs frequently, contact BERTHOLD. Verify whether massive electromagnetic disturbances have triggered the event.
R
Ruben LittleSep 2, 2025
What to do if there is an error in the high-voltage supply of the photomultiplier in Berthold Duo?
- F
  froblesSep 2, 2025
  If an error in the high-voltage supply of the photomultiplier was detected in your Berthold Measuring Instruments, check the detector electronics and photomultiplier. If necessary, contact BERTHOLD.
A
Amber KingAug 31, 2025
What to do if the average HV is more than 20% lower than the Default-HV in Berthold Duo Measuring Instruments?
- W
  williamsjamesAug 31, 2025
  If the average HV is more than 20% lower than the Default-HV in your Berthold Measuring Instruments, check the Default HV for plausibility and change it if necessary. Also, check the detector electronics and photomultiplier. If necessary, contact BERTHOLD.