Need help?Do you have a question about the Berthold LB 444 K-40 and is the answer not in the manual?
Details how to access and configure parameters for potassium content measurement.
Allows configuration of product-specific settings, detector codes, and measurement modes.
Explains the process of calibrating the instrument for accurate measurements.
Provides a step-by-step summary of the installation process.
Detailed steps for initial system configuration including basic settings and parameter selection.
Guides through essential initial configurations like password, date, time, and language.
Details the prerequisites and step-by-step procedure for instrument calibration.
Methods for verifying calibration and making minor result adjustments.
Lists and explains error codes, their causes, remedies, and how to acknowledge them.
General safety guidelines applicable to all service procedures.
Describes performing a plateau check to verify detector functionality.
Visual inspection and replacement procedures for crystal-multiplier assembly and photomultipliers.
Details how to access and configure parameters for potassium content measurement.
Allows configuration of product-specific settings, detector codes, and measurement modes.
Explains the process of calibrating the instrument for accurate measurements.
Provides a step-by-step summary of the installation process.
Detailed steps for initial system configuration including basic settings and parameter selection.
Guides through essential initial configurations like password, date, time, and language.
Details the prerequisites and step-by-step procedure for instrument calibration.
Methods for verifying calibration and making minor result adjustments.
Lists and explains error codes, their causes, remedies, and how to acknowledge them.
General safety guidelines applicable to all service procedures.
Describes performing a plateau check to verify detector functionality.
Visual inspection and replacement procedures for crystal-multiplier assembly and photomultipliers.
General| Sample Type | Liquid |
|---|---|
| Shielding | Lead |
| Source Activity | Up to 10 MBq |
| Output | Analog and digital signals |
| Power Supply | 100-240 VAC, 50/60 Hz |
To Next Page
