Berthold LB 444 K-40 - Setup Protocol

01/10 347 LB 444 K-40
53
10.5 Setup Protocol
Measuring Point ............................................ Date: ...........................
Product: ........................................................
Parameter Range Value
Password
Instrument ID
Program version
Configure instrument
Radiation measure yes / no
Error mode Hold/continue
Product no. 1/2/3/4
Measuring path cm
Measure mode
Time constant s
Rapid switchover ON/OFF
Sigma for radiating
interference
0-10
Count rate limit (min) cps
-1
Count rate limit (max.) cps
-1
Current out for concentration 0-20mA or 4-20mA
0/4 mA
20 mA
Current output error Hold Value: 0-22mA