To Next PageTo Next Page
Need help?Do you have a question about the Bestop Supertop and is the answer not in the manual?
General| Category | Automobile Parts |
|---|---|
| Type | Soft Top |
| Hardware Included | Yes (Bow assemblies, door surrounds, etc. depending on model) |
| Compatibility | Jeep Wrangler |
| Color Options | Black, Tan |
| Material | Various (Sailcloth, Twill, etc. depending on model) |
| Window Type | Various (Tinted, Clear, Removable, etc. depending on model) |
Measure windshield to body distance for correct bracket placement.
Measure windshield distance for proper bracket fit on Wrangler/YJ.
Attach the two-piece retainer to the windshield frame with screws.
Lay bow halves, secure front mounts, and join bow ends.
Connect rear bow, install vertical rods, and attach horizontal rod.
Drape top over bows and insert plastic strip into windshield retainer.
Snap top flaps to studs on the rear bow for secure fit.
Attach rear curtain retainer to tailgate and corner belt rails.
Adjust vertical retainer mount for better seal or clearance.
