EFL Operator Guide
System Interconnections
Part No. MAN/EN5103-0076 Page 15 of 34 Revision A (Jan 2014)
System Interconnections
The EFL system components are connected together using a total of 9 cables. These
include 2x USB cables connected to the PC, 2x DB25M-F LaserSpeed gauge cables,
and 5x DB9M-F cables of various lengths. The system interconnections are
diagramed in the following 4 figures.
Connect the USB-2COM Pro converter and the optional relay IO module after
the EFLTrak software and FTDI drivers have been installed.
Connect the USB-2COM Pro dual serial converter to the synchronization
breakout as shown above using the 3m DB9M-F serial cables provided.
To Next Page
Loading...
