EFL Operator Guide
EFLTrak® Software
Part No. MAN/EN5103-0076 Page 30 of 34 Revision A (Jan 2014)
The Data File Header is a multi-line editable text area that allows the operator to enter
any notes required. The text area is pre-pended as a header on the EFL data file(s).
All Data Storage Options are saved as a part of the current setup recipe. See the
section on Creating a New EFL Setup Recipe for more information.
Shortcut: To quickly access the Data Storage Options screen, click on the Data File
text box at bottom-center of the main EFLTrak display screen.
Replaying EFL Data
By default, files with the .EFL extension are associated to EFLTrak during the
installation of EFLTrak. Double-clicking on an EFL data file will automatically start
EFLTrak and the data will be “replayed” in the strip chart graphs.
Stored EFL data can also be recalled from the configuration menu using the Re-Play
EFL Data button. The user is prompted to browse to the EFL data file of choice and
the data is reloaded into the strip chart plots when the file selection is made. The light
blue, focus view cursor displayed in the run view plot can be selected and dragged to
any location in the run data. The data highlighted by the cursor is displayed in the
focus view plot with a vertical cursor showing the points of measurement under
inspection. To restore the focus view cursor to the end of the run data, double-click on
the cursor.
To Next Page
Loading...
