EFL Operator Guide
EFLTrak® Software
Part No. MAN/EN5103-0076 Page 19 of 34 Revision A (Jan 2014)
EFLTrak® Software
EFLTrak is a Windows .NET-based software program, which allows you to acquire and
display the differential fiber length to buffer length in real-time. The EFLTrak software
configures the EFL operating parameters, displays data, and collects data, which can
be stored to a computer hard drive. The LaserSpeed gauge is a very versatile tool that
is applicable for a wide variety of process measurement schemes. EFLTrak allows you
to take full advantage of this versatility in a straightforward, easy-to-understand
manner.
There are several features available with the EFLTrak software. EFLTrak can mimic a
chart recorder output on the screen and presents a length history depiction of the EFL
data. EFLTrak can acquire and store EFL data. EFLTrak can display stored EFL data
from a previously acquired data file.
EFLTrak Display Screen and Menus
The EFLTrak main display screen is divided into 3 areas: 1) the Focus View, 2) the
Run View and 3) the statistics window pane.
There are two graphs displayed at one time when running the EFLTrak software, the
Focus View graph and the Run View graph. Both graphs act like chart recorders and
display Excess Fiber Length Ratio information relative to the length of buffer tube. The
latest EFL measurements are also displayed in the statistics pane. The Focus View is
used to display realtime excess fiber length measurements usually over a short length
of cable. The Focus View also displays the Speed and Quality Factor of the fiber and
To Next Page
Loading...
