Beta LaserMike LASERSPEED 8000 - Page 52

LaserSpeed 8000/9000 I/O Module Instruction Handbook
Setup
Part No. 93342 / Drawing No. 0921-01516 Page 52 of 84 Revision E (Dec 2013)
~I:VelRes Parallel Port Velocity Resolution
~I:VelRes<CR> Read Setting
Response Format:
ParallelPort VelRes <N><CR>
~I:VelRes=<N><CR> Set Value
Factory Default: 1 Minimum: 0.001 Maximum: 1
Where <N> indicates the Velocity resolution multiplier.
Value
Velocity Multiplier
1
Velocity x 1
0.1
Velocity x 0.1
0.01
Velocity x 0.01
0.001
Velocity x 0.001
This command allows to user to reduce the output resolution of the velocity
measurement by scaling the measurement result.
Example: To reduce the velocity resolution by a factor of 10x
~I:VelRes=0.1<CR>.
~I:DisplayType Parallel Port Display Type
~I: DisplayType<CR> Read Setting
Response Format:
ParallelPort DisplayType <N><CR>
~I:DisplayType =<N><CR> Set Value
Factory Default: 0 Minimum: 0 Maximum: 1
Where <N> indicates the display output type.