4
CHECKS AND MAINTENANCE
35
GB
- Unscrew the plug 4 in the left-hand cas-
ing and use pliers to extract the filter.
Clean it carefully and blow it through with
compressed air. Check for damage to the
O-rings, and replace them if necessary.
Refit all the parts and tighten the plug to
15 Nm.
- Perform the same procedure for the filter
located on the right side of crankcase.
- Put a drawn pan under the engine closer
to the paper filter cover 1 and then un-
screw 2 the cover.
4
1
2
10Nm
15Nm
To Next Page
Loading...
