Beta EVO 4T - Engine Oil Check; Engine Oil Replacement

4
CHECKS AND MAINTENANCE
34
GB
KEY TO SYMBOLS
Tightening torque
Threadlocker Medium
Grease
ENGINE OIL
CHECK THE LEVEL
The engine oil level must be checked when
the engine is warm.
Let the engine run for a few minutes then
turn it off.
Keep the vehicle in vertical position relative
to the ground.
Wait a few minutes and check the oil level
through the window 1.
The level must be between the limits indi-
cated in the picture.
Otherwise restore the oil level through 2.
Use the oil indicated on page 18 in
the “Recommended lubricants and liquids”
table.
REPLACEMENT
Always perform the replacement when
engine is hot:
- Position the drive on a flat base ensuring
stability.
- Place a container under the engine.
WARNING:
Hot oil can cause severe burns!
- Unscrew the filler cap 2 and the drain
plug 3.
- Completely empty the crankcase.
- Close the cap 3.
2
MAX
MIN
1
3
20Nm