4
CHECKS AND MAINTENANCE
53
GB
1
10Nm
10Nm
10Nm
25Nm
50Nm
LEGS ASSEMBLY AND PARTS
Apply the legs to the vehicle and tighten
the screws 1 to the torque indicated.
ATTENTION: Tightening of the
screws should be carried out by
adjusting the torque wrench to the
stability torque with repeated tighten-
ing until stability torque has been
achieved.
Grease the wheel bolt.
Apply wheel and wheel bolt.
Apply brake caliper, disc cover and fender.
Tighten to the torque indicated.
ATTENTION: Tightening of the
screws should be carried out by
adjusting the torque wrench to the
stability torque with repeated tighten-
ing until stability torque has been
achieved.
Place the vehicle on the ground.
Compress and release the fork 3-4 times.
Tighten the wheel bolt and the screws of
the foot.
ATTENTION: Tightening of the
screws should be carried out by
adjusting the torque wrench to the
stability torque with repeated tighten-
ing until stability torque has been
achieved.
Tighten to the torque indicated.
To Next Page
Loading...
