4
CHECKS AND MAINTENANCE
37
GB
REPLACEMENT
Position the vehicle on a flat base and in
a stable manner.
Replacement of the coolant must take place
when the engine is cold.
1) Unscrew cap 1.
2) Unscrew screw 2, collecting the liquid
in a container.
3) Drain the liquid.
4) Tighten screw 2 applying the specific
washer.
2
1
10Nm
WARNING: Never unscrew the filler cap of the radiator when the engine is
hot. Danger of burning!
WARNING:
Wear appropriate protective clothing and protection gloves.
Keep coolant out of reach of children.
Avoid any direct contact of the coolant with skin, eyes or clothing. If this hap-
pens:
- with the eyes, rinse immediately with plenty of water and seek medical advice;
- with skin, Immediately clean contaminated areas with soap and water Change
clothing that is contaminated with coolant.
If coolant is swallowed, contact a doctor immediately.
To Next Page
Loading...
