4
CHECKS AND MAINTENANCE
56
GB
20mm
1
2
CHECK AND ADJUST
TIGHTENING CHAIN
Position the vehicle on the central bike
stand.
If the distance between chain and
swingarm is less than 20 mm proceed
with adjustment.
Loosen the pin 1.
Rotate register 2 until the distance between
chain and swingarm is that recommended.
3
80Nm
Rotate register 3 into the same position
as register 2.
Ensure the distance between chain and
swingarm is that recommended.
If the distance between chain and
swingarm is not that recommended pro-
ceed to readjustment.
Tighten the pin to the torque indicated.
To Next Page
Loading...
