4
CHECKS AND MAINTENANCE
38
GB
3
10Nm
5) Unscrew drain screw 3 and fill until the
liquid starts to overflow the screw.
6) Tighten screw 3.
7) Place the vehicle as shown and pro-
ceed to filling.
8) Reapply the loading cap 1.
The amounts of liquid are shown on page
10.
Use the liquid indicated on a page 18
in the “Recommended lubricants and
liquids” table.
WARNING:
Never unscrew the filler cap of the
radiator when the engine is hot.
Danger of burning!
WARNING:
Wear appropriate protective cloth-
ing and protection gloves.
Keep coolant out of reach of chil-
dren.
Avoid any direct contact of the cool-
ant with skin, eyes or clothing. If this
happens:
- with the eyes, rinse immediately with
plenty of water and seek medical advice;
-
with skin, Immediately clean contami-
nated areas with soap and water Change
clothing that is contaminated with coolant.
If coolant is swallowed, contact a doctor
immediately.
To Next Page
Loading...
