3
CHECKS AND MAINTENANCE
43
GB
•
Loosen the counter-nut 2 and remove cap 1.
• Extract the spring 3 and overturn the pipe,
making the oil escape.
• Move the pumping unit and drain the
remaining oil.
When the oil has been drained completely,
introduce the amount of new oil described
in chapter 1 page 20.
• Bleed the pumping unit of air, making it
rise and fall until complete loading.
Introduce the spring and screw the cap 1
until it is completely inserted on the pump-
ing rod. Block the cap to the pumping
rod via the counter-nut 2.
1
2
3
1
2
To Next Page
Loading...
