Need help?Do you have a question about the BETCO BPS28 and is the answer not in the manual?
Essential safety warnings and precautions for machine operation, including child safety and personal protective equipment.
Section to record machine model, serial number, and commissioning details for ownership tracking.
Locating and understanding the machine's serial number and CE marking for identification and compliance.
Detailed specifications of the sweeper, including dimensions, weight, capacity, power, and noise levels.
Introduction to the manual's purpose, machine development, and the importance of following maintenance instructions.
Defines the intended use of the machine for cleaning dry surfaces and prohibits other applications.
Instructions for carefully unpacking the machine and checking for any damage or missing parts.
Steps for preparing the machine, including mounting the side brush and handlebar.
Procedure for preparing the battery before mounting, emphasizing ventilation and safety precautions.
Description of the machine's controls, including levers, switches, and indicator lights.
Step-by-step guide for starting the sweeper, including pre-start checks and operation sequence.
Guidelines for optimal machine operation, including precautions for different material types and brush adjustment.
Procedure for safely removing and emptying the front and rear waste bins.
Checklist for routine maintenance tasks, including battery liquid, belts, nuts, brushes, and gaskets.
Instructions for cleaning, checking electrolyte levels, and servicing the battery in a ventilated area.
Steps for recharging the battery using a charger, including indicator light meanings.
Procedures for cleaning and replacing the machine's filter, including dust environment considerations.
Guide for replacing and adjusting the side brush for optimal cleaning performance.
Instructions for replacing and adjusting the main brush, noting the correct direction of rotation.
Detailed steps for replacing the drive belt and the side brush belt.
Instructions for replacing outer side, inner side, and center flaps on the machine.
Procedure for removing and remounting the traction cable, including adjustment.
Steps for replacing the side brush lifting cable, covering removal and remounting.
Schematic diagram illustrating the electrical connections and components of the machine.
Guide to common problems, their causes, and recommended remedies for machine issues.
Instructions for safely dismantling and disposing of the machine and its components according to regulations.
Visual representation of the machine's main assembly with numbered parts for identification.
List of parts with item numbers, part numbers, descriptions, and quantities for the main assembly.
Detailed exploded view of various machine components with part identifiers.
List of parts with item numbers, part numbers, descriptions, and quantities for detailed components.
Exploded view illustrating the wheel and drive system components with part identifiers.
List of parts with item numbers, part numbers, descriptions, and quantities for wheel and drive assemblies.
Exploded view showing the control panel and related accessory components with part identifiers.
List of parts with item numbers, part numbers, descriptions, and quantities for control panel and accessories.
Details warranty terms for different components and equipment types, including specific coverage periods.
To Next Page
General