User Manual for PH Warming Cabinets Beverage-Air
Rev. 01/21 Beverage-Air 5
IMPORTANT INFORMATION
This unit is intended to be used in a commercial
application. That includes bars and restaurants.
If installed in a residence some commercial service
companies may not be able to service it on site.
The manufacturer has designed and produced this
machine with the nest in materials. The manufacturer
assumes no liability for units that have been altered in
any way. Alterations or part substitutions will void the
warranty.
Limitations
The machine is designed for use indoors in a controlled
environment. It must be kept dry, not overheated or
subjected to excessive cold. May only be connected to
a dedicated electrical circuit. Extension cords are not
permitted.
Minimum Maximum
Voltage 208 240
Room Air Temp 60º F 100º F
Agency Approvals
These marks appear on the dataplate or serial tag, located
in the inside of the left wall. The dataplate also contains
the model and serial numbers as well as electrical
requirements.
Model
Cabinet Dimensions
w x d x h (Inches)
Pass Thru Doors
Glass or Solid
Door
Full Load
Amps
Power Cord
Plug (NEMA)
PH1-1BHG
26 1/2 x 34 3/8 x 83 3/4 Half Glass
6.3
6-20P
PH1-1S-PT
26 1/2 x 38 3/8 x 83 3/4
Yes Full Solid
PH1-1HS-PT
Yes Half Solid
PH1-1BG-PT
Yes Full Glass
PH1-1BHG-PT
Yes
Half
Glass
PH2-1S
52 1/8 x 34 5/8 x 83 3/4
Full Solid
13
PH2-1HS
Half Solid
PH2-1BG
Full Glass
PH2-1BHG
Half Glass
PH2-1S-PT
52 1/8 x 38 5/8 x 83 3/4
Yes Full Solid
PH2-1HS-PT
Yes Half Solid
PH2-1BG-PT
Yes Full Glass
PH2-1BHG-PT
Yes Half Glass
Height includes legs
• All models are 208-240 volts, 60 Hz AC.
• ALWAYS REFERENCE YOUR EQUIPMENT DATA PLATE AMPS, FOR THE MOST UP TO DATE AND ACCURATE VALUES.
To Next Page
Loading...