Beyerdynamic Xelento wireless - Overview of LED Displays; Help with Problems; FAQ

23/30Operation
English
Overview of LED displays
LED DISPLAY FUNCTION
Flashes red/yellow/green Charging
Steady green light Fully charged
Lights up once red for 1.5sec Switch o
Flashes rapidly red Battery almo empty
Slowly flashes alternately blue and red Bluetooth® pairing mode active
Briefly flashes blue every 7 sec Bluetooth® connection active
Briefly flashes blue every 3 sec Bluetooth® connection lo
Briefly flashes white every 7 sec Media playback active (LHDC, aptX™ HD)
Briefly flashes blue every 7 sec Media playback (other codecs)
Flashes rapidly blue Incoming call
Briefly flashes blue every 7 sec Call active
Lights up pink 3x per sec Soware update mode active
Help with problems / FAQ
Xelento wireless cannot be switched on.
Battery is empty or almo empty ► Charge the battery.
No audio output.
There is no Bluetooth® connection ► Connect Xelento wireless with the
playback device.
Xelento wireless does not appear in the available Bluetooth® devices in the playback
device
Xelento wireless is switched o ► Switch on Xelento wireless.
Xelento wireless is not in pairing mode ► Place Xelento wireless in pairing mode.
There is already a Bluetooth® connection to
another playback device
► Disconnect the Bluetooth® connection to
the other and place Xelento wireless near
the desired device.
Playback is too quiet, even though it is set to maximum on Xelento wireless.
The audio signal being played back is too
quiet.
► Set playback volume on the playback
device to maximum.