1. Product Features
1)Main Panel works as stand alone alarm
2)Easy One-button Operation
3)4 zones for DIY home security system
4 ) W h e n t r i g g e r a l a r m s , t h e L E D i n d i c a t o r o f
correspondent zone will flash to warn you the exact
alarm area
5)More safer to disarm by 4-Digital password on keypad
6)Away & home modes to set arming delay/arming
7)Support to put magnet on the left/right side of the main
panel
8)Chime/alarm switch for ring tone selection
9)Stylish design fits home decoration
10)Expandable to pair up to 10 remotes, and each zone
could add up to 10 sensors.
2. Operating Principle
Professional DIY Security Alarm System:
Built-in Magnetic Contact Sensor & PIR motion sensor
which can detect any forceful break-in and activate the
alarm to deter potential intruders and alerts neighbors.
The LED indicator of corresponding alarm zone flashes to
warn you the exact alarm area too.
3. Check Kit Accessory
D3-1 Kit includes:
1x Main Panel
4x Door/window Sensors
1x Remote Control
1x User Manual
All battery and Adhesive tape
4. Button Introduction
4.1 Main panel Button
4.1.1 ARM:
Short Press on button on panel, the 4 LED indicators
of the panel will flash one time and beep once.
1 2