4.1.2 DISARM:
Enter the default password 1234 on keypad, the 4 LED
indicator of Panel will flash twice and beep twice. (3 beep
sounds indicates entering wrong password)
4.1.3 Away Home Mode: Arm delay & Alarm delay for
30seconds (Only work for Main panel)
-When you arm, the Main panel indicator will flash every
second for 30seconds,then the main panel will emit a
beep sound to notice you arm successfully. And when
trigger alarm, the main panel will also delay 30seconds to
alarm. This mode is great for you to arm when you are
about to leave home without any alarms to annoy you.
4.1.4 At Home Mode: Arm directly and alarm directly
when trigger alarm.
(Only work for Main panel)
4.1.5 Chime/alarm Switch (Only work for main panel)
Choose Chime or alarm sound for main panel.
4.2 Remote Control Button
3 4
To Next Page