BIFFI ALGA-EAC Series - Table of Contents

i
Installation, Operation and Maintenance Manual
MAN 564_EAC Rev. 2 June 2020
Table of Contents
Table of Contents
Table of Contents
Section 1: General warnings
1.1 Generalities .................................................................................................... 1
1.1.1 Applicable Regulation ......................................................................... 1
1.1.2 Terms and Conditions .......................................................................... 2
1.2 Identication Plate ......................................................................................... 2
1.3 Introducing the Actuator ................................................................................ 2
1.4 Data Sheet ..................................................................................................... 3
Section 2: Installation
2.1 Checks Upon Actuator Receipt ....................................................................... 4
2.2 Actuator Handling .......................................................................................... 4
2.3 Storage .......................................................................................................... 7
2.4 Actuator Assembly on the Valve ..................................................................... 7
2.4.1 Types of Assembly ............................................................................... 7
2.4.2 Assembly Procedure .......................................................................... 12
2.5 Pneumatic Connections ............................................................................... 13
2.6 Electrical Connections (If Any) ...................................................................... 14
2.7 Commissioning ............................................................................................ 15
Section 3: Operation and Use
3.1 Operation Description .................................................................................. 16
3.2 Residual Risks ............................................................................................... 22
3.3 Calibration of the Angular Stroke ................................................................. 22
3.4 Calibration of Micro-switches (If Foreseen) ................................................... 28
3.5 Calibration of the Operation Time (Optional - If Foreseen) ............................ 29
Section 4: Operational Tests and Inspections
Operational Tests and Inspections ................................................................ 31