To Next PageTo Next Page
Need help?Do you have a question about the BIFFI ICON-030 and is the answer not in the manual?
Provides safety guidelines for installing actuators in hazardous environments.
Steps for securely mounting the actuator onto the valve.
Guidance on making the necessary electrical connections to the actuator.
Specific instructions for handling explosion-proof enclosures.
Precautions for installing the actuator in environments with explosive dusts.
Procedure for Emergency Shut Down (ESD) functionality.
Information on configuring the actuator settings via the local interface.
Procedure for accessing and changing actuator settings.
Routines for configuring actuator parameters based on valve type.
Procedure to configure output torque limits for opening and closing.
Configuration for Emergency Shut Down (ESD) functionality.
Options for configuring remote control modes (2, 3, or 4 wires).
Configuration of the positioning function for inching or modulating.
Configures actuator action upon loss of input signals.
Configuration of the 4-20 mA analog output signal.
Configuration of inputs to inhibit actuator movement.
Steps to diagnose and resolve issues with power-on.
Diagnosing issues when the actuator does not respond to remote commands.
Diagnosing why the motor runs but the valve doesn't move.
Troubleshooting why the actuator fails to stop at open or closed positions.
Understanding and responding to actuator warning and alarm messages.
Provides safety guidelines for installing actuators in hazardous environments.
Steps for securely mounting the actuator onto the valve.
Guidance on making the necessary electrical connections to the actuator.
Specific instructions for handling explosion-proof enclosures.
Precautions for installing the actuator in environments with explosive dusts.
Procedure for Emergency Shut Down (ESD) functionality.
Information on configuring the actuator settings via the local interface.
Procedure for accessing and changing actuator settings.
Routines for configuring actuator parameters based on valve type.
Procedure to configure output torque limits for opening and closing.
Configuration for Emergency Shut Down (ESD) functionality.
Options for configuring remote control modes (2, 3, or 4 wires).
Configuration of the positioning function for inching or modulating.
Configures actuator action upon loss of input signals.
Configuration of the 4-20 mA analog output signal.
Configuration of inputs to inhibit actuator movement.
Steps to diagnose and resolve issues with power-on.
Diagnosing issues when the actuator does not respond to remote commands.
Diagnosing why the motor runs but the valve doesn't move.
Troubleshooting why the actuator fails to stop at open or closed positions.
Understanding and responding to actuator warning and alarm messages.
General| Brand | BIFFI |
|---|---|
| Model | ICON-030 |
| Category | Controller |
| Language | English |
