BIG TREE TECH Octopus MAX EZ User Manual

Shenzhen Big Tree Technology Co., Ltd.
BIGTREETECH
24 / 35
If you are using displays like LCD2004, 12864, mini12864, etc., you can also control
RGB from your display directly.
#define LED_CONTROL_MENU // add led control to your menu.
Filament Sensor
Standard filament run out sensors are usually comprised of a microswitch which signals
the mainboard of filament status with High or Low level signal.
#define FILAMENT_RUNOUT_SENSOR // enable filament run out sensor
#define FIL_RUNOUT_ENABLED_DEFAULT true // true default to filament run out
sensor enabled
#define NUM_RUNOUT_SENSORS 1 // number of filament run out sensor
#define FIL_RUNOUT_STATE LOW // voltage level of the filament runout sensor
trigger signal. Set according to the actual situation of the module. If the module sends a
low level when the filament is abnormal, set it to LOW.

BIG TREE TECH Octopus MAX EZ Specifications

General

Brand	BIG TREE TECH
Model	Octopus MAX EZ
Category	Computer Hardware
Language	English