G G
www.forsmw.com
13
Follow the movement with the extendable tower so that the front
of the hooklift trailer’s frame does not catch on to the rollers.
When you have passed the rollers, always keep the hooklift
trailer’s frame close to the rollers.
O-loading!
Release the brakes on both the towing vehicle and the trailer to make it easier to roll o the load. Check
the position of the tower during o-loading so that the container frame does not catch on the rollers
from above.
• Lock the frame and activate bogie blocking between the towing vehicle and trailer.
• Raise the hook lift frame slightly so that the container bridge does not scratch against the frame
when you slide it backwards
• Then retract the tower backwards so that the locking rails/wings on the container bridge frame
move freely and cannot be damaged.
• Adjust the tower upwards continually so that the container frame does not catch on the rollers
at the back of the trailer during o-loading.
• If the tower is not adjusted during o-loading, there is a considerable risk of the exchange’s lock
being damaged if the container frame catches in the rollers.
HANDLING IN TIPPING
Ensure that the towing vehicle and the trailer are securely coupled
before tipping!
Ensure that the position
selector is in the
tipping position before
commencing tipping!
To Next Page
Loading...
