Biltek SL600ACL - Specifications

2
Specications
Model
SL600ACL
Input Power
110–120 V~ 60Hz
Rated Power
0.37 hp 280 W
Torque
11.8 lb.-ft. 16 N·m
Duty Cycle
S2 20 min.
Max. Gate Weight
1400
0.7
lb.
T
600
0.6
kg
MT
Max. Gate Speed
42.5 fpm 13 m/min.
Chain Type
ANSI #41
Prov. Chain Length
20 ft. 6 m
Max. Gate Length
40 ft. 12 m
Max. Noise
56 dB
Temp. Range
−4°Fto158°F −20°Cto70°C
Weatherproong
IP44
IR Signal Frequency
940 nm 1.9 kHz
IR Sensor Range
6.6–40 ft. 2–12 m
Max. Remotes
40
Remote Range
98.4 ft. 30 m
Remote Frequency
433.92 MHz
Power Cord Length
4 ft. 11 in. 1.5 m
• All provided components of this device are weatherproofed to withstand normal rain. Ensure
adequate insulation and protection of all electrical connections and never direct pressurized
water against any part of this device.
• Keepyourgatewellmaintainedanditstrackfreeofgrimeanddebris.Periodicallyconrm
that it runs smoothly under manual operation.
•
DO NOT
use if any component is missing, loose, worn, or damaged. Tighten, repair, or
replace problematic parts before further use. Only replace components with identical parts
and always fully replace damaged electrical cords.