Binary B-660-MTRX-4X4 - Web UI Settings: Network Configuration

23
4. Network
Network is used to set between the stac and dynamic IP address.
• DHCP: When enabled, the IP address of the Matrix is assigned automacally by the DHCP
server connected.
• Stac: When enabled, set up the IP address manually.
• Apply: Click to enable the network seng.
Note:
• When “Stac” is selected, please ensure your PC is in the same network segment as the
Matrix, i.e. the IP address of your PC should be set as 192.168.xxx.xxx.
• Please wait for 2-3 minutes for the Matrix’s LAN module to reboot and reconnect aer the
network seng is changed.
By default, the IP type is set as DHCP. If it doesn’t have DHCP server, the matrix supports for
local IP address. Use API Command to get the IP address.