Need help?Do you have a question about the Binary B-500-MTRX-230-4x4 and is the answer not in the manual?
Introduces the Binary HDMI matrix switcher and its capabilities.
Lists all items included in the product package.
Highlights the key technical specifications and functionalities of the device.
Lists necessary tools and compatible equipment for installation.
Describes the components and indicators on the front panel of the matrix switcher.
Details the various input and output ports located on the rear of the device.
Provides a diagram and fundamental steps for setting up the matrix switcher.
Offers advice for a successful installation process, including testing and labeling.
Guides on selecting an optimal location for the switcher, considering ventilation and environment.
Instructions for mounting the matrix switcher in a standard equipment rack.
Guides for connecting displays using HDMI outputs and HDBaseT with wiring recommendations.
Guidelines for selecting and installing Cat5e/6 cables for HDBaseT connections.
Details how to connect control systems via IR and RS232 ports for matrix control.
Guides on installing and configuring IR pass-through for remote control.
Details on the IR ports on the matrix switcher for pass-through setup.
Explains IR connections for the B-500-RX-230-IR receiver and flashers.
Illustrates typical IR pass-through scenarios from control systems and rooms.
Explains EDID management, auto configuration, embedded EDIDs, and learning.
Step-by-step instructions for performing Auto EDID configuration.
Manually assigning pre-programmed EDIDs to inputs.
Instructions for learning EDID from displays and checking EDID status.
Outlines advanced settings configurable via the dedicated software utility.
Information on how to update the device's firmware.
Details on using the IR remote for routing, muting, and status checks.
Procedure to reset the device to its original factory settings.
Best practices and initial steps for resolving system issues.
Guides for resolving no signal, compatibility, and audio problems.
Information on how to contact technical support for assistance.
A template for documenting the system's sources, displays, and connections.
Lists the detailed technical specifications of the matrix switcher.
Details the 2-year limited warranty for the product.
General| Signal Type | HDMI |
|---|---|
| HDCP Compliance | HDCP 2.2 |
| Video Bandwidth | 18 Gbps |
| Input Ports | 4 |
| Output Ports | 4 |
| Resolution Support | Up to 4K@60Hz |
| Control Interface | IR, RS-232, TCP/IP |
| Operating Temperature | 0°C to 40°C |
| Dimensions | 440mm x 220mm x 44mm |
To Next Page
