Need help?Do you have a question about the Binary 120 Series and is the answer not in the manual?
General| HDCP Version | 2.2 |
|---|---|
| Resolution Support | Up to 4K@60Hz (4:4:4) |
| Input Channels | 12 |
| Output Channels | 12 |
| Signal Type | HDMI |
| Power Supply | 100-240VAC, 50/60Hz |
| Weight | 3.5kg |
| HDMI Version | 2.0 |
| Audio Support | Dolby Digital |
| Control | IR |
| Control Interface | RS-232, IR |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% (non-condensing) |
Illustrates the fundamental setup and connections for the matrix switcher.
Step-by-step guide for the initial setup and connection of the matrix.
Guidelines for connecting source devices to the HDMI inputs.
Instructions for connecting output devices to the HDMI outputs.
Information on connecting control systems (IR, RS-232, Ethernet).
Details the RS-232 pin configuration and serial control setup.
Explains the setup for controlling the matrix via Ethernet/IP.
Method to automatically configure EDID based on connected displays.
Step-by-step procedure for setting up Auto EDID.
A table detailing available embedded EDID resolutions, color depth, and audio.
To Next Page
