Binatone Help Line : 0845 345 9677 30
The CC2310 can answer calls after 2 to 9 rings. If you don’t set a number, it will
answer after 5 rings.
If you want to dial in and check your messages while you’re away, you can set
TOLL
SAVER – if there are new messages, the CC2310 will answer the call after 2
rings.
If there are no new messages, it will answer after 5 rings. So, if you call in and you
don’t get an answer after 2 or 3 rings, you can hang up and save on call charges.
Press
the MENU/OK/MUTE.
Scroll UP until “TAM”,
Press the MENU/OK/MUTE and you will see “MESSAGE”.
Scroll UP until the display shows “TAM SETTINGS”.
Then press the MENU/OK/MUTE and you will see “TAM ON/OFF”.
Scroll
DOWN
until the display shows
“SET RING”
then press the MENU/OK/MUTE and the display will show “5 RINGS”.
To Set Ring number
Scroll UP or DOWN to select your choice.
Then press the MENU/OK/MUTE and the display will return the to previous menu.
Scroll UP or DOWN to select
ALARM ON or ALARM OFF.
Onceselected press the MENU/OK/MUTE
and the display will return to the previous menu.
Press
the PHONE BOOK/BACK until you return to idle mode.
You can set a new message alert tone which is normally turned off by default.
When the tone is turned on, you will hear this audible warning tone every
Press the MENU/OK/MUTE.
Scroll UP until “TAM”,
Press the MENU/OK/MUTE and you will see “MESSAGE”
.
Scroll
UP
until the display shows
“TAM SETTINGS”
.
Then press the MENU/OK/MUTE and you will see “TAM ON/OFF”
Scroll DOWN until “TAM ALERT”
Then press the MENU/OK/MUTE and
the display will show “OFF” which is the default setting.
To Set TAM alarm
60 seconds, if you have new messages.
.
Press the PHONE BOOK/BACK until you return to idle mode.
or
or
To Next Page
Loading...
