Binatone CONCEPT COMBO 2310 - To Reset TAM to Default Settings

Binatone Help Line : 0845 345 9677 34
You will restore the following settings after you select this command.
- Ring setting: 5
- TAM ON - OGM 1
- Security code: 0 0 0 0
- TAM Alarm: OFF
Press
the MENU/OK/MUTE.
Scroll DOWN until “TAM”,
Press the MENU/OK/MUTE and you will see “MESSAGE”
.
Scroll DOWN until the display shows “TAM SETTINGS”.
Then press the MENU/OK/MUTE and you will see “TAM ON/OFF”.
Scroll
the DOWN until the display shows “TAM DEFAULT”.
Then press the MENU/OK/MUTE and the display will show “PIN CODE?”.
Enter the PIN code using the keypad.
Then press
the MENU/OK/MUTE
to confirm, and the TAM
To Reset TAM to default settings
settings will be defaulted.