Binatone CONCEPT COMBO 2310 - Display, Ringing, and Intercom Problems; Persistent Faults and Line Checks

Binatone Help Line : 0845 345 9677 41
x
Make sure you’re holding the earpiece correctly over your
ear.
“The volume in the
earpiece is low
when I’m on a call”
x Adjust the volume using the UP/DOWN button.
Intercom and transfer
x
Make sure the other handset is in range of the base unit.
“I can’t transfer a
call”
x Make sure you are dialling the correct number for the other
handset.
If the fault persists…
x
Disconnect all other instruments
connected to the same
line as the CC2310 and try to make a call
x
Disconnect the base unit from the telephone line and plug
a different phone into the master telephone socket. Try
making a call. If this works, the line is OK.
x
If the call does not work, and you are using a two-way
socket adapter, remove it and plug a telephone directly into
the socket. If the call now works, the adapter may be faulty.
x If you cannot make a call, the fault may be on the exchange
line. Contact the service provider (the BT engineers on 151
for UK only, or your cable company).
x
If you still cannot identify the cause of the problem, contact
the Binatone on 0845 345 9677 (UK only).
“When I try to
make a call, I hear
Busy tone.”
x
If you’re using a CC2310 multi-handset system, check
whether other handsets are already on a call.