Binatone iDECT M3i - Record Memo; Set Answer Mode; Set Incoming Message Recording Time; Call Screening Overview

27
You can record a memo message for another user. When you record a memo,
the message counter will increase by one and the message can be played back
in the same way as answering machine messages. Memo recording can still
function even when the answering machine is turned off.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select MEMO.
3. Press <MENU/OK> to start memo recording and
“
RECORDING
”
is displayed.
4. Press <MENU/OK> to stop memo recording and save the memo.
OR
4. Press <Cancel/Mute> to stop memo recording without saving and return back
ANS. MACHINE
menu.
You can use the TAM SETTINGS menu through the handset to change the
settings of your answering machine.
8.5 Answering Machine Settings
8.4 Record Memo
By default, the answer machine is set in
ANS & REC mode which allows callers
to leave a message. This mode can be changed to ANSWER ONLY which
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS
.
8.5.1 Set the Answer Mode
does not allow callers to leave a message. In that case, your callers will be
prompted to call back later.
3. Press <MENU/OK> to show ANSWER MODE.
4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or
ANSWER ONLY
5. Press <MENU/OK> to confirm.
The answering machine announces the outgoing message when it answers a call.
T
here is a pre-set OGM for each of
mode or ANSWER ONLY
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select TAM LANGUAGE.
4. Press <MENU/OK> and <UP/DOWN> to select your desired OGM language.
5. Press <MENU/OK> to confirm.
When your answering machine memory is full and it is in
will return to
ANS & RECORD
mode automatically after some messages have
answer mode will
ANSWER ONLY automatically. It
been deleted.
8.5.2 Set the Outgoing Message (OGM) Language.
ANS & REC
mode, which can only be in English or French (Francais) on this model.
change to
, the
& RECORD
ANS
to the