www.binatonetelecom.com 18
5.3 Charge Battery
Speakeasy 600 is powered by a rechargeable battery.
New batteries are only partially charged when shipped.
Before you start using your phone, you need to charge the
battery for at least 12 hours.
1. Connect the supplied power adaptor to a wall outlet.
2. Connect the power cord to Speakeasy 600 as shown
in the picture. The battery charging indicator starts
scrolling and the red status light turns on.
1. The charging indicator stops scrolling when the battery
is fully charged.
2. Disconnect the charger.
Tips:
You can also charge Speakeasy 600 by connecting it to a
computer using the supplied USB data cable.
If the battery is totally flat, it may take a while before the
charging indicator starts scrolling.
Battery performance depends on your usage patterns.
To Next Page
Loading...
