Binder BD 23 - Equipment and Options BD (Extract)

BD / ED / FD (E2) 03/2019 page 47/68
12.7 Equipment and options BD (extract)
To operate the chamber, use only original BINDER accessories or accessories / components
from third-party suppliers authorized by BINDER. The user is responsible for any risk arising
from using unauthorized accessories.
Chamber size
BD 23
BD 53
BD 115
BD 240
BD 400
BD 720
Standard equipment
Microprocessor temperature controller with LED
display, timer function, and ramp function
     
Temperature safety device class 3.1 acc. to DIN
12880:2007
     
Inner glass door
     
Communication interface RS 422
     
Exhaust duct, internal diameter 50 mm / 1.97
inches, with adjustable ventilation slide
     
Four castors (2 lockable)
--
--
--
--
--

Options / accessories
Rack, chrome-plated or stainless steel
     
Perforated rack, stainless steel
     
Access ports with various diameters, with
silicone plug
     
Lockable door
     
Rubber pads for safe stacking (4 pieces)
  
--
--
--
Additional Pt 100 temperature sensor, fix or
flexible, with external connection including
LEMO plug (3 pins)
     
Water-proof interior socket, IP type of protection
65, 230 V 1N ~ 50-60 Hz. Max. load 500 W
     
Analog output 4-20 mA for temperature with 6
pole DIN socket, DIN plug included
     
Disconnectable audible over-temperature alarm
     
Data logger kit T 220
     
Factory calibration certificate
     
Extension to factory calibration certificate
(additional values)
     
Measuring protocol acc. to DIN 12880:2007
     
Qualification folder
     
Chamber acc. to cUL standard in 115V
1N~60Hz
     
Neutral cleaning agent (liquid concentrate)
     
Stable table on wheels with castors and locking
brakes
--
   
--
Legend:  Standard equipment  Optional -- Not available