Binder BF 720 - Dimensions Size 720

105 pages

Save Page as PDF

To Next Page

To Previous Page

BD / BF / ED / FD / FED (E3.1) 12/2017 page 86/105

16.14 Dimensions size 720

Main Page

Table of Contents2
Safety5
Legal Considerations5
Structure of the Safety Instructions5
Signal Word Panel5
Safety Alert Symbol6
Pictograms6
Word Message Panel Structure7
Localization / Position of Safety Labels on the Chamber7
Type Plate8
General Safety Instructions on Installing and Operating the Chambers9
Intended Use11
Chamber Description12
Chamber Overview12
Triangular Instrument Panel13
Main Power Switch ED, FD, FED 72014
Completeness of Delivery, Transportation, Storage, and Installation14
Unpacking, and Checking Equipment and Completeness of Delivery14
Guidelines for Safe Lifting and Transportation15
Storage15
Location of Installation and Ambient Conditions15
Installation17
Mounting the Tilt Protection Holders (Chambers with Window)17
Electrical Connection18
Connection to an Exhaust/Ventilation System (Optional)19
Start up20
Behavior When Opening the Door20
Overview and General Settings on the R4 Controller21
Controller Overview21
Normal Display21
Setting the Menu Language22
Setting Date and Time23
Selecting the Temperature Unit25
Set-Point Entry for Temperature and Fan Speed26
Set-Point Entry for Temperature in Two-Door Chambers (ED, FD, FED 720)27
Adjusting the Air Flap Position28
Changing the Passwords for User Level and General Controller Functions29
Overtemperature Protection31
Overtemperature Protective Device (Class 1)31
Safety Controller32
Setting the Safety Controller Set-Point33
Alarm Message and Proceeding in Case of an Alarm34
Function Check34
Disconnectable Audible Over-Temperature Alarm (Option)35
Timer Functions36
Selecting the Timer Function36
Timer Function "Delayed off37
Entry and Activation of the Timer Run-Time and Fan Setting37
Turning off the Timer Function or Changing the Settings39
Timer Function "Temperature Dependent Delayed Off" (BF, FED)41
Entry and Activation of the Timer Run-Time, Fan Setting and Set-Point Entry41
Turning off the Timer Function or Changing the Settings43
Timer Function "Delayed On" (BF, FED)44
Entry and Activation of the Timer Run-Time and Fan Setting44
Changing the Settings46
Temperature Programming Example (BF, FED)46
Ramp Function47
General Information47
Setting and Displaying the Ramp Function48
Displaying the Effective Ramp Set-Point and Changing the Target Ramp Set-Point49
Turning off the Ramp Function50
Data Recording Via Usb Interface51
Starting Data Recording51
Terminating Data Recording52
Network Configuration for Chambers with Ethernet Interface53
Options56
Communication Software APT-COM™ 3 Datacontrolsystem (Option)56
Data Logger Kits (Option)56
Object Temperature Display with Additional Pt100 Temperature Sensor (Option)56
Analog Output for Temperature (Option)57
Water Protected Disconnectable Internal Socket (Option BD, BF)57
HEPA Fresh Air Filter (Option for FD, FED)58
Mostly Gas-Tight Version (Option for BF, FD, FED)58
Inert Gas Connection with Mostly Gas-Tight Version (Option for BF, FD, FED)58
Maintenance, Cleaning, and Service60
Maintenance Intervals, Service60
Cleaning and Decontamination61
Cleaning61
Decontamination62
Sending the Chamber Back to BINDER Gmbh63
Disposal64
Disposal of the Transport Packing64
Decommissioning64
Disposal of the Chamber in the Federal Republic of Germany64
Disposal of the Chamber in the Member States of the EU Except for the Federal Republic of Germany65
Disposal of the Chamber in Non-Member States of the EU66
Troubleshooting67
Technical Description68
Factory Calibration and Adjustment68
Definition of Usable Volume68
Over Current Protection68
BD Technical Data69
BF Technical Data70
ED Technical Data72
FD Technical Data74
FED Technical Data75
Equipment and Options (Extract)77
Accessories and Spare Parts (Extract)78
Dimensions Size 5680
Dimensions Size 11582
Dimensions Size 26084
Dimensions Size 72086
Certificates and Declarations of Conformity89
EU Declaration of Conformity for BD89
EU Declaration of Conformity for BF91
EU Declaration of Conformity for ED93
EU Declaration of Conformity for FD95
EU Declaration of Conformity for FED97
Product Registration99
Contamination Clearance Certificate100
For Chambers Located Outside the USA and Canada100
For Chambers Located in the USA and Canada103

Binder BF 720 - Dimensions Size 720

Table of Contents

Other manuals for Binder BF 720

Related product manuals