Binder FD 53 - Page 46

BD / ED / FD (E2) 03/2019 page 46/68
Chamber size
FD 23
FD 53
FD 115
FD 240
Different electrical data for FD-UL constructed for the USA and Canada
(model versions FD023UL-120V, FD053UL-120V, FD115UL-120V, FD240UL-208V)
Nominal voltage (±10 %)
at 60 Hz power frequency
V 115 115 115 208
Current type
1N~
1N~
1N~
3N~
Nominal current
Amp
7.0
10.5
14.0
11.2
Power plug
NEMA
5-15P
5-20P
5-20P
L21-20P
Chamber fuse
6,3 x 32 mm / 250V / super time-lag TT
Amp
12,5
external
16
external
16
external
3 x 16
internal
Environment-specific data
Noise level (mean value)
dB (A)
< 55
< 55
< 55
< 55
Energy
consumption
at 70 °C / 158 °F
Wh/h
145
172
230
370
at 150 °C / 302 °F
Wh/h
300
429
544
850
at 300 °C / 572 °F
Wh/h
720
951
1100
1400
All technical data is specified for unloaded chambers with standard equipment at an ambient temperature
of +22 °C ± 3 °C / 71.6 °F ± 5.4 °F and a power supply voltage fluctuation of ±10. Technical data is
determined in accordance to BINDER Factory Standard Part 1:2015 following DIN 12880:2007.
All indications are average values, typical for units produced in series. We reserve the right to
change technical specifications at any time.
If the chamber is fully loaded, the specified heating up times may vary according to the load.