R
Ryan RussellSep 12, 2025
Why have programs been deleted from my Binder FP 400?
- SsullivanjamesSep 12, 2025
If programs have been deleted, ensure that the programs are no more needed when changing from 2 programs to 1 program or vice-versa.
To Next PageTo Next PageWhy have programs been deleted from my Binder FP 400?
If programs have been deleted, ensure that the programs are no more needed when changing from 2 programs to 1 program or vice-versa.
Why does the Binder FP 400 Laboratory Equipment controller return to Normal Display from any level?
If the controller returns to Normal Display from any level, repeat entries and enter the values rapidly. This happens when no button was hit for more than 120 seconds.
Describes the information provided on the chamber's identification plate.
Provides essential safety guidelines for the installation and operation of the drying and heating ovens.
Defines the approved applications and limitations for the drying and heating ovens.
Provides a general overview of the drying and heating oven's main components and features.
Details the layout and function of the standard chamber's control panel.
Provides advice and warnings for safely lifting and moving the chamber.
Specifies requirements for the installation site and ambient operating conditions.
Details the procedures and requirements for connecting the chamber to the power supply.
Guides users on initial settings and display functions of the RD3 program controller.
Explains the operation, setting, and function check of the Class 2 safety device.
Describes the Class 3.1 optional safety device, its function, setting, and checks.
Specifies recommended maintenance schedules and requirements for authorized service.
Provides detailed instructions for cleaning and decontaminating the chamber.
Explains specific disposal regulations for Germany under the WEEE directive.
Outlines disposal procedures for EC member states outside Germany, following WEEE.
Presents comprehensive technical specifications for various chamber models.
Instructions and form for contamination clearance for non-US/Canada locations.
Instructions and form for contamination clearance for US and Canada locations.
General| Internal Volume | 400 liters |
|---|---|
| Rated Voltage | 230 V |
| Capacity | 400 liters |
| Power Supply | 230 V, 50/60 Hz |
| Heating Rate | 5 K/min |
| Material | Stainless steel |
| Controller | Digital display with PID microprocessor control |
| Safety Features | Over-temperature protection |
