Binder FP 720 - User Manual

Issue 07/2017 Art. No. 7001-0130
Operating Manual
FP – Drying and heating ovens
with forced convection and program functions
with microprocessor program controller RD3
Model Model version Art. No.
FP 53 (E1.1) FP053-230V 9010-0153, 9110-0153
FP 53-UL (E1.1) FP053UL-120V 9010-0175, 9110-0175
FP 115 (E1.1) FP115-230V 9010-0255, 9110-0255
FP 115-UL (E1.1) FP115UL-120V 9010-0262, 9110-0262
FP 240 (E1.1) FP240-230V 9010-0263, 9110-0263
FP 240-UL (E1.1) FP240UL-120V 9010-0264, 9110-0264
FP 400 (E1.1) FP400-230V 9010-0265, 9110-0265
FP 400-UL (E1.1) FP400UL-120V 9010-0266, 9110-0266
FP 720 (E1.1) FP720-230V 9010-0267, 9110-0267
FP 720-UL (E1.1) FP720UL-120V 9010-0268, 9110-0268
BINDER GmbH
 Address: Post office box 102, 78502 Tuttlingen, Germany  Phone: +49 7462 2005 0
 Fax: +49 7462 2005 100  Internet: http://www.binder-world.com
 E-mail: info@binder-world.com  Service Hotline: +49 7462 2005 555
 Service Fax: +49 7462 2005 93 555  Service E-Mail: service@binder-world.com
 Service Hotline USA: +1 866 885 9794 or +1 631 224 4340 x3
 Service Hotline Asia Pacific: +852 390 705 04 or +852 390 705 03
 Service Hotline Russia and CIS: +7 495 988 15 16

Summary

Safety

General Safety Instructions on Installing and Operating the Chambers

Safety guidelines for chamber setup and daily use.

Chamber Description

Control Panel

Details of the interface for operating the chamber.

Scope of Delivery, Transportation, Storage, and Installation

Location of Installation and Ambient Conditions

Requirements for chamber placement and operational environment.

Installation of the Equipment

Electrical Connection

How to connect the chamber to the power supply.

Start Up

Settings at the RD3 Program Controller

Initial configuration of the RD3 program controller.

Fixed Value Entry Mode

Week Program Editor

Program Editor

Selecting Between Set-Point Ramp and Set-Point Step

Choosing temperature transition methods: ramp or step.

Programming with Setting Ramp (Default Setting)

How to program gradual temperature changes.

Programming with Setting Step

How to program sudden temperature changes.

Set-Point Entry for Program Operation

Detailed steps for entering program values.

Deleting a Program Section

Procedure for removing program segments.

Example Programming for the Week Program Editor

Example Programming for the Program Editor

Desired Time Function

Defines target temperatures for different periods.

Proceeding in Detail

Step-by-step guide for program editor setup.

Behavior at Failures

Behavior After Power Failure

How the chamber behaves after power interruptions.

Alarm Messages

Explanation of error messages and buzzer functions.

Temperature Safety Devices

Temperature Safety Device Class 2 (DIN 12880)

Description and function of the class 2 safety device.

Temperature Safety Device Class 3.1 (DIN 12880) (Option)

Description of the optional class 3.1 safety device.

Maintenance, Cleaning, and Service

Maintenance Intervals, Service

Cleaning and Decontamination

Procedures for cleaning and disinfecting the chamber.

Troubleshooting

Technical Description

Technical Data

Detailed specifications for chamber models.

Dimensions FP 53

Dimensions FP 115

Dimensions FP 240

Dimensions FP 400

Dimensions FP 720

Binder FP 720 Specifications

General

Brand	Binder
Model	FP 720
Category	Laboratory Equipment
Language	English