iv
Avoid Unsafe Equipment
The equipment may be unsafe if any of the following statements apply:
- Equipment shows visible damage,
- Equipment has failed to perform an intended operation,
- Equipment has been stored in unfavourable conditions,
- Equipment has been subjected to physical stress.
If there is any doubt as to the service ability of the equipment, do not use it. Have it
properly checked out by a qualified service technician.
Live Conductors
When the equipment is connected to its measurement inputs or supply, the opening of
covers or removal of parts could expose live conductors. Only qualified personnel, who
should refer to the relevant maintenance documentation, must do adjustments,
maintenance or repair.
Equipment Modification
The equipment described in this manual has been built with approval safety
components and has been designed in accordance with safety standard IEC61010.
It has been supplied in a safe condition. To avoid introducing safety hazards, never
install non-standard parts in the equipment, or make any unauthorized
modification. To ensure safety, always return the equipment to Bio-Logic SAS for
service and repair.
To Next Page
Loading...
Need help?
General
