Bio-Logic SP-300 User Manual

Manual for VMP300-based instruments
73
specifically designed for each
battery type.
It is possible to test many batteries simultaneously by linking multiple holders in series.
NOTE: Before starting a measurement check if the contact between the battery and the
connector of the battery holder is efficient (stable voltage).
7.8 Labview VIs
The potentiostat can be controlled with the free EC-Lab
®
development package. This package
is devoted to software developers who need to integrate the control of the Bio-Logic
potentiostats/galvanostats/EIS with OEM software. The EC-Lab
®
development package
includes a LLB LabVIEW
®
library where the functions of the DLL are implemented
(Requirements: LabVIEW
®
V8.5 or higher). This development package includes a DLL with
specific functions for:
- connection/disconnection to a selected instrument (Ethernet or USB),
- initialization of the channels by loading the firmware,
- loading protocols on the channels:
- all techniques available in EC-Lab
®
Express
- starting/stopping the selected channel(s),
- retrieving data.
- Note that the time base with these LabVIEW
®
Vis depends on the selected protocol.
7.9 Electrochemistry accessories
Bio-Logic can provide accessories for many fields of electrochemistry and battery chemistry.
Please consult the Bio-Logic website for more details:
http://www.bio-logic.info/electrochemistry-ec-lab/accessories/

Bio-Logic SP-300 Specifications

General

Brand	Bio-Logic
Model	SP-300
Category	Measuring Instruments
Language	English