Bio-Logic VMP-300 - User Manual

Installation and
Configuration Manual
for VMP-300-based* Instruments
and Boosters
*VMP300-based instruments are:
 SP-200
 SP-240
 SP-300
 VSP-300
 VMP-300
 HCV-3048

Summary

Installation and Configuration Manual for VMP-300-based Instruments and Boosters

Safety and Legal Information

Safety Precautions and Usage

Covers intended use, instructions, grounding, atmosphere, and general safety.

Introduction to the Product Range

Getting Started

Hardware Installation

Guides users through the physical setup and installation of the instrument hardware.

Computer Connectivity

Communication Connections

Explains USB and Ethernet connections for instrument-computer communication.

PC Installation and Configuration

Details PC setup, TCP/IP configuration, and USB driver installation.

Connecting the PC to the Instrument

Network and IP Configuration

Covers network setup, IP addressing, and configuration for instrument communication.

EC-Lab Software Connection

Guides users on connecting the instrument to the EC-Lab® software for operation.

Firmware Management

Cell Connection

High Current Booster Connections

Explains the connection procedures for high current boosters with cells.

Advanced Features

Options & Accessories

Validation and Calibration

Channel Validation

Booster Board Calibration

Maintenance

Calibration and Cleaning

Technical Specifications

Equipment Ratings

Channel Specifications

Troubleshooting

Data Saving and PC Disconnection

Bio-Logic VMP-300 Specifications