22
Fig. 21: EC-Lab
®
software installation. Step 8.
At the end of the installation, the instrument will be detected via USB is and ready to be
connected and used. See 4: Connecting the PC to the instrument to connect to the instrument
with the software.
3.2 EC-Lab
®
Express software/OEM package installation
The EC-lab
®
Express software package is optional software which offers the user some
enhanced features and control over the regular EC-Lab
®
software. Installation of EC-lab
®
Express is not required to operate the instrument provided that EC-Lab
®
is installed. The
installation of EC-lab
®
Express software and the OEM package is done in exactly the same
way as for EC-Lab
®
. Please see the above section for the installation.
NOTE: EC-lab
®
Express doesn’t support the VMP-300.
3.3 Errors during the installation
During the installation an error may occur if you are not the administrator of the computer.
In this case it is necessary to contact your network administrator for the installation.
Fig. 22: Error during the installation.
To Next Page
Loading...
Need help?
General
