Biobase BBS-DDC - Trouble Shooting and Solution; Common Faults and Solution

25
3. Trouble Shooting and Solution
3.1 Common faults and solution
Please confirm that the power is well connected, the cord is in good condition (without any damage)
and the power lock is unlocked before trouble shooting the following problems.
Faults
Check parts
Measures
LED lamp fail to work
LED Stand plug
Check if the stand plug and stand are
connected tightly
LED Stand
Change the stand
Circuit
Check the circuit
Control panel
Replace the control panel
UV lamp fail to work
Interlock
Check the blower and LED is turn off
or not
Lamp holder
Connect the tube and lamp holder
tightly
Circuit
Check the circuit
UV lamp
Replace the UV lamp
Ballast
Replace the ballast
Control panel
Replace the control panel
Button fail to work
Control panel
Make sure the power is well connected
and the fuse is in good condition
Check if the button is broken
Make sure the connecting wire is well
connected
Replace the control panel
Blower fail to work
Blower
Replace the blower if it is defective
Circuit
Check the circuit
Control panel
Replace the control panel
No electricity in socket
power supply
Check if power supply is broken
power cable
Check if power cable is broken
Fuse
Check the fuse