Biobase BBS-DDC - Replacement of LED Lamp; Replacement of UV Lamp

27
3.3 Replacement of LED Lamp
When the LED light needs to be changed, turn off the power. Then remove the LED stand, unplug
the right side, After replacing a new LED stand, inserted into the inclined slot. (Picture 14)
v
Picture 13 Picture 14
3.4 Replacement of UV Lamp
UV lamp should be replaced regularly according to the frequency of use, when using UV lamps
reach to the time of 600 hours, we recommend to replace the lamp. UV intensity test card can be
used to confirm if need to change UV lamp. Please turn off the power. Screw the lamp to take down
from holder, then replace with a new one. Please reference to picture 15.
LED stand
LED stand plug